Perfect ending to a very long day.

IMG_0988

My day started at 3:30 a.m. I was asked to do the extra early start at work today. I’m not a morning person. Three-thirty I don’t even consider morning. That’s the middle of the night as far as I’m concerned. Here’s the flip-side. I finished work at 11:30 and was home before noon. AND, it was a gorgeous day. I napped and accomplished a few things around the house.

Around 7-ish in the evening I started to get a second wind. The dew point and temperatures were dropping, and the air was still. Frankly, it was a perfect evening. I felt a need to get out for another evening bike ride. The Brompton has become my favorite grab and go bike for these summer evenings jaunts around my neighborhood.

Def: Jaunt  :to make a usually short journey for pleasure.

IMG_0986
The short, new section of the Cross Town Trail.

I had no route planned when I left the house. I ended up down by the St. Louis River on the Western Waterfront Trail. The Brompton made a suitable trail bike a a few miles of hard pack trail.

IMG_1001
Western Waterfront Trail.

My timing was not intentional, but I arrived down by the river as the sun set for the day. It had already dropped over the hillside to the west, but I was there for the official sunset at 7:50 p.m.

IMG_0999
With few clouds and low humidity, the sunset was not particularly colorful.

I experienced the “Blue moment”, that time of day moments before last light where everything turns a shade of blue before slowly fading to black. I rode home in the dark. Thankfully the Brompton has front and rear hub generator powered lights.

IMG_0992.JPG

It really was the most pleasant of endings for a very long day. I shall sleep good tonight.

My route for the evening.

 

Commuting on a Brompton in the snow.

IMG_0133

Only a 20% chance of rain today in the forecast. It was for later in the day. Weather app was reporting clear skies when I got up this morning. It was still dark outside, so I didn’t look outside to see for myself. Temperature was around freezing. Fairly typical weather pattern for the past few weeks. You can imagine my surprise to see big snowflakes coming down when I headed out the door with my Brompton in hand. I was prepared for a cool, uneventful ride to work.

IMG_0136

The snow only lasted as long as my 20 minute commute. It was heaviest in the picture above. The flakes of snow were the big wet kind. The kind that can momentarily blind you if they land right in your eye. Many did. It turned an expected uneventful ride into a mini adventure.

IMG_0135

I even ran a quick errand on the way. My new commute takes me right past the main Post Office. I finished our taxes last night. The tax software I used gave us free e-file for Federal taxes, but wanted to charge me $24.99 to e-file the State Income tax form. I printed it out, stuffed it in an envelope and paid 71 cents to “mail” file it instead.

The ride home was sunny, dry and windy. There was a stiff, cold Northwest wind. It felt completely different than the ride into work. But that’s life near the Big Lake during the shoulder seasons.

I’ve had my Cycliq Fly6 tailight/HD camera since January. It records in 10 minute splits. When I’ve shared them in the past I just uploaded a full ten minutes. Well, today when I got home I finally learned how to edit it down to only the segments I want to highlight or share. Here’s a video from the rear taillight/camera during the peak snowfall during my short commute. It’s 1:27 in length. Enjoy:

The story of my Brompton.

006

Here’s a bike I never thought I would buy. A Brompton folding bike.I first started noticing the category of “folding bikes” back in 2008 or 2009. I’m not sure why I started developing an interest in small wheeled bikes. About the same time there were stories in the local paper about the possibility of  passenger train service being restored between Duluth and Minneapolis. Passenger rail service had been discontinued in the early 80’s. I couldn’t think of a reason to buy a folding bike. It was basically a curiosity of mine. With the talk of rail service I started to imagine day trips or weekend trips to Minneapolis. A folding bike would be the perfect multi-modal companion. I decided if the rail service ever became a reality I would buy a folding bike. After hours of reading on-line articles and reviews, it seemed to me the Brompton would be the bike for me. It’s a well engineered bike, made in England. It’s known for it’s high quality construction and for having the smallest and fastest fold.

Fast forward to 2012. Rail service between Duluth and Minneapolis was still a dream. It was lost in the planning stages and started to seem less likely. I had saved up a large sum of money for a planned cross country trip on the TransAmerica Trail. I was planning a 3 month leave from work to accomplish this. Long story short, I started and ended the trip in Oregon. That’s a story for another day. I returned to work a few weeks later with a sudden increase in available funds in my bike budget. I spent about a thousand dollars doing some upgrades on my 2006 Surly Pugsley. In January of 2013. My wife had a weekend retreat to attend in the Twin Cities. I came along for the ride. While she attended her retreat I would visit some of my favorite bike shops and do some shopping at REI.

One of my favorite shops is Perennial Cycle in Minneapolis. It just so happens that Calhoun Cycle is also the only Brompton Dealer in Minnesota. I walked in the shop and about 90 minutes later came out carrying a Brompton S6L. The bike you see above. I was able to test ride several different models (models, meaning different handlebar set-ups) and pick the the one I liked the most. I also test rode the bike I bought. It’s the only bike I own I was able to test ride before buying.

The buying process is rather straight forward. There are two methods. Buy an in stock bike from a dealer like Perennial Cycle. Or Build Your Brompton online. Get all the options you want. It is then delivered to your nearest Brompton Dealer. I was thinking I would be ordering a Brompton and not expecting to find one with all the options I wanted. Calhoun had one with everything I wanted. When you build your own you start with a base single speed model and pick the options you want. If I had done that, this is what I would have had to pick. I got the “S” model. There are four different handlebar configurations. The “S’ is the flat bar. I’m short and prefer a slightly aggressive stance on the bike. The “S” bar gave me a nice fit. I have the 6-speed model with lowered gearing. It’s a wide range 3-speed Sturmey Archer internally geared hub with a two speed derailleur (2 x 3 equals 6 speeds) with a smaller chainring to provide a lower climbing gear.  The “L” stands for “mudguards w/o a rear rack”. This gives me the model, S6L. Other options included a front carrier block and Brompton S-bag luggage bag. A Shimano Dyno Hub Generator with front and rear lights. I would have had to upgrade the tires to Schwalbe Marathon Plus tires. My bike originally had the optional Brooks B17 saddle. I’m not a fan of Brooks saddles. I swapped it out for a cheaper Brompton saddle. A saddle that is surprisingly very comfortable               .

I didn’t yet know how I would use the Brompton. The start of train service has been pushed back to 2020. I wasn’t even sure I’d like it enough to ride it. What I discovered is a bike that rides very nicely. The steering can feel a bit twitchy at first due to the small wheels. I got used to that after a few rides and don’t even notice it anymore. The small wheels accelerate quickly. It feels sturdy and solid. There is a hill I routinely hit between 40-42 mph on the Brompton when descending. It feels very solid descending at 40 mph. I’ve used it for leisure rides. I’ve commuted on it regularly except during the winter months. I like to throw it in the back of the car whenever we travel anywhere out of state.It takes up very little room. It stays dry, clean, and secure inside the car.

9659426818_16c205f441

Riding rural roads in southern Michigan during a visit to relatives.

9698256927_561887b9c5

Car camping at a Sleeping Bear Dunes National Lakeshore in Michigan.

16058813002_e311314ca9

Riding along the I&M Canal Trail in Joliet, Illinois.

During the first year I had it I tried to get into the habit of working it into my normal bike rotation. I  had a goal to ride it 1,000 miles in the first year. I only ended up putting on 380 miles. In the second year I kept the same goal of 1,000 miles on the Brompton. I exceeded it with 1,440 miles. I loved every minute of that year. Most of my miles were work commutes. But I did quite a few leisure rides covering distances of 20-50 miles per ride.

Brompton 001

In November of 2013 I upgraded the stock generator headlight with a halogen bulb to a Lumotec IQ Headlight. This was a big improvement in the ability to light my way.

Brompfication 005

Thanks to a company in Bangkok called Brompification, I’ve done some rather nice modifications to my Brompton.

In April of 2014 I did quite a few upgrades. Original parts that come on the Brompton include parts made of plastic. Brompification makes nice CNC machined parts to replace original plastic parts. They work in steel, titanium and aluminum.  I replaced the Lever Bolts and the Hinge Clamp Plates. The original levers are plastic. The Brompification hinge clamp plates improve on the design of the original. The originals rotate around when you are trying to tighten them down. It takes some fiddling. The Brompification hinge clamps are locked in place and don’t rotate.

I replaced the plastic Seat Clamp Quick Release.

I replaced the plastic Rear Frame clip with a stainless steel one.

I replaced the plastic Easy Wheels with thinner aluminum wheels. New on left, old on right:

Brompfication 012

I really enjoyed upgrading this assortment of parts. It bumped up a notch the already high quality of my Brompton.

In November of 2014 I upgraded the Chain Tensioner. This also functions as the two-speed derailleur on 6-speed Brompton’s like mine. The original chain tensioner is a big piece of plastic. The Brompification chain tensioner is a beautifully CNC machined aluminum component.

At the same time I upgraded the Chain Tensioner I added some simple bar ends to the straight handlebars to give me another hand position. This increased my comfort on longer rides.

New bits for the Brompton 006.JPG

I finally have the Brompton built exactly how I like it. It’s a great little bike that rides more like a normal sized bike. It was a gamble buying it not knowing what I’d used it for. It turns out I use it the same as my other bikes. It just has the added benefit of folding down very small.

Also, I’ve got the “fold” and “unfold” down in the 10-12 second range. I practiced it a lot. Here’s a fun video of a folding competition at Perennial Cycle.

My small wheel dreams now seem to drift to a Moulton now that I have a Brompton I love. A Moulton has now become my “small wheeled” dream bike.

IMG_5170-1024x768This one’s a beaut!!